Wednesday, December 5, 2012
Christmas Giving: A box full of letters.
This year, I was inspired by Design*Sponge to write a stack of letters to her. I scribbled some notes before I started the project, so I wouldn't get stuck trying to think of topics to write about along the way. I decided I would write one letter to open each day between Christmas and New Year's Day, making for a total of eight letters. I reminisced about visiting her when I was little, revealed some secrets and insecurities, told stories from recent travels and local adventures, and shared New Year's resolutions with her. I included photos and an article I thought she might find interesting.
I decided to go the extra mile with packaging these letters primarily because, as a stationery designer, I have a healthy stock of envelopes available. I stamped on both the envelopes and cards and tied everything together with baker's twine. I hope these letters will not only make her smile each day, but that they give her a glimpse of how much she is loved.
Are you creating any handmade gifts this Christmas? Happy Holidays!
Wednesday, May 19, 2010
A modern garland tutorial.
via craftzine
Monday, March 29, 2010
Tiered cake stand tutorial.
Wednesday, February 17, 2010
Great favor idea: sea glass candy.
Wouldn't this sea glass candy make a beautiful favor? I'm envisioning little clear baggies with a fun tag and ribbon... Plus, you can customize the color. Visit this great tutorial for full details on how to make your own. Enjoy!
Tuesday, September 15, 2009
A DIY burlap banner.
Via Craftzine.com
Wednesday, February 4, 2009
DIY: Reception card box.
If you liked the card box shown in Monday's featured wedding, here is a step-by-step guide to creating your own. Enjoy!
SUPPLIES
All supplies can be purchased at a local craft and hardware store. This supply list makes 32-40 ribbon wands.
- Paper box: Purchase one large paper mache box from a local craft store.
- Varying widths of double-face satin ribbon
For added interest, choose a combination of colors that complement your wedding palette. - Paint: Purchase one small bottle of craft paint in the color of your choice.
- Sponge brush
DIRECTIONS
- Using a utility blade, carefully cut a slit into the lid of the box. Be sure to make it wide enough to accommodate large greeting cards.
- Paint the box.
- Cut the ribbon into appropriate lengths to fit around the box. Cut ribbon at an angle to avoid any fraying that might occur.
- Using a heavy-duty permanent adhesive (such as a Tombow roller), adhere each ribbon strip to the box. Create variation by alternating wide and narrow widths of ribbon. Adorn the lid as desired.
Friday, November 21, 2008
DIY: Monogram Banners.

Make the entrance to your ceremony or reception with these elegant monogram banners. After your big day has come and gone, they're wonderful mementos.
SUPPLIES
All supplies can be purchased at a local craft. The finished size of these banners is approximately 26" tall by 22" wide with the initials being 14" tall.
- Upholstery fabric: Purchase enough fabric to make two 26" x 22" banners. When possible, choose a heavy upholstery fabric in your color palette.
- Stitch-witchery or sewing machine
- Dowel rods: 4 in 1/4" widthCut dowel rods to approximately 30" long.
- Styrofoam: 22 sheets of floral styrofoam, approximately 1" thick.
- Floral buds: Purchase bunches of inexpensive, seasonal flowers.
- Ribbon: Choose a sturdy satin ribbon.
- 2 Snaps per banner: You can use other alternatives, such as Velcro. These are not required if you wish to create a triangular hanger.
- Hot glue gun
- Invisible fishing line thread
DIRECTIONS
- After cutting the fabric to size, use stitch-witchery or a sewing machine to hem the edges. Create a pocket at the top and bottom of each banner by folding the fabric over and placing the hem low enough for the dowel to fit into. Be sure to leave openings on either side so the dowel can slide in easily.
- Using software such as Microsoft Word, print initials at desired size. The sample used letters that were approximately 14" tall. To print at this size, use the "tile" setting on your printer to create a large stencil. Doing so will print the initial onto several pages that can then be cut out and taped together.
- Trace around the initials' edges onto styrofoam. Cut with a utility blade.
Tip: If the styrofoam breaks, it's not a problem. You can hot glue it back together. For added support, use wooden skewers to support any breaks that might occur. - If you purchased flower buds in bunches, you will want to cut off individual buds. Using these individual buds, cover the letters completely using hot glue and by pushing the stems into the styrofoam.
- To attach the letters to the banners, use a combination of hot glue and clear fishing line to attach/sew the letters to the material.
- Attach ribbon to dowel rods. Sew snaps to the appropriate place on the ribbon to create a hanging loop. Creating a triangular hanger is much easier and only involves looping one large piece over each end of the dowel.
Thursday, November 20, 2008
Different ways to... exit the ceremony.
This is the beginning of a series of posts on different ways to do things at your wedding. From walking down the aisle to exiting your reception, the ideas presented here will range from traditional and classic to modern and unique. My goal for these posts is to help you think outside of the box by introducing a little something that will give your big day a more personal feel.
So, let's start with a different way to exit the ceremony. Bells and bird seed are good options, but the visual element created by ribbon wands makes for exciting wedding photos! Add a little note to your ceremony program to cue your guests when it's time to stand up and wave.
SUPPLIES
All supplies can be purchased at a local craft and hardware store. This supply list makes 32-40 ribbon wands.
- Ribbon: 100 yards
Purchase approximately 100 yards of thin inexpensive ribbon. Choose a color combination, or one solid color, that suits your needs. Additionally, if you want your ribbon wands to be fuller than those shown in the sample image, just add more ribbon. - Dowel rods: 32-40 in 1/4" width
Craft stores sell dowel rods at pre-cut lengths in bags of 8-10. The 12" length makes for an ideal ribbon wand. While you can also purchase dowel rods at a hardware store, you will most likely have to cut them to your desired length. - Paint
Purchase one small bottle of craft paint in the color of your choice. The ribbon wands shown in the sample image were covered with a metallic pearl coating. For a simpler option, you can also leave them unfinished. - Sponge brush
- Sandpaper: Fine grade
- Screw eyes: 40 in 214 x 13/16 size
These can be difficult to screw into the head of each dowel, so use pliers after getting it started. Also, be gentle, as the wood can split.
DIRECTIONS
- Using the sponge brush, paint all dowels. Stand them on end in holes punched in a piece of styrofoam to dry.
- After the wands have dried completely, gently sand them with fine grade sandpaper. Painting may roughen the surface, so sanding them will remove rough areas without removing the paint.
- Attach a screw eye to one end.
- Cut the ribbon into 15-20" lengths. Cut ribbon at an angle to avoid any fraying that might occur.
- Gather a total of 5-6 ribbons and slip through the screw eye. Tie in a nice, tight knot.




